Memorize the desired center
speaker mode while it flickers.
6
Select the desired rear speaker
mode.
7
16
Memorize the desired front
speaker mode while it flickers.
4
The desired front speaker mode is memorized and
then it enters the center speaker mode.
If the front speaker display disappears, start from
the above step 2 again.
In Theater, Hall, Stadium, Church mode, it will
enter the rear speaker mode directly, this means the
center speaker mode can not be selected.
In normal stereo mode, it will enter the subwoofer
mode directly, this means the center and the rear
speaker modes can not be selected.
Each time this button is pressed, the center speaker
mode changes and flickers for 5 seconds as follows;
The desired center speaker mode is memorized and
then it enters the rear speaker mode.
In Dolby 3 Stereo mode, it will enter the subwoofer
mode directly, this means the rear speaker mode can
not be selected.
If the center speaker display disappears, start from
the above step 2 again.
Select the desired center
speaker mode.
5
Adjusting the speaker settings
Press the SPEAKER MODE
button for more than 2 seconds
to enter the front speaker
mode.
2
Select the desired front speaker
mode.
3
Adjusting the settings of front, center, rear speakers
and subwoofer connected.
If the speaker setting is adjusted to “SMALL”, the
low range bass sound of the channel(s) is redirected to
the subwoofer or the front channels and if the speaker
setting is adjusted to “NONE”, the sound of the
channel(s) is redirected to other channels.
The front speaker mode is displayed.
Each time this button is pressed, the front speaker
mode changes and flickers for 5 seconds as follow;
:
When using the relatively large front speakers
(full range speakers).
:
When using the relatively small front speakers
(which cannot reproduce the low range bass
sounds deeply).
↓
LARGE
↓
SMALL
:
When using a relatively large center speaker
(full range speaker).
:
When using a relatively small center speaker
(which cannot reproduce the low range bass
sounds deeply).
:
When not using a center speaker.
Only in the Dolby Digital(AC-3) or the Dolby Pro
Logic mode, the “NONE” mode can be selected.
↓
LARGE
↓
SMALL
↓
NONE
Each time this button is pressed, the rear speaker
mode changes and flickers for 5 seconds as follows;
:
When using a relatively large rear speakers.
(full range speakers).
:
When using a relatively small rear speakers.
(which cannat reproduce the low range bass
sounds deeply).
:
When not using the rear speakers.
Only in the Dolby Digital(AC-3) mode, the “NONE”
mode can be selected.
↓
LARGE
↓
SMALL
↓
NONE
Commentaires sur ces manuels