Sherwood AX-5505 Instructions d'exploitation télécharger pdf (Page 5)

ENGLISH

■CONNECTING SPEAKERS

Plug this cord into a wall AC outlet

■AC INPUT CORD

• This outlet is switched on (power on

mode) and off (standby mode)

according to power control as follows;

(Maximum total capacity is 100 W

(0.43A))

tandby mode - switched AC outlet off

ower on mode - switched AC outlet on

• This amplifier enables you to listen to two pairs of speakers

individually or in various combinations.

Connect your main speakers to the SPEAKER A terminals and

use the SPEAKER B terminals for the remote pair located

elsewhere in your home.

• Be sure to connect speakers firmly and correctly according to the

channel (left and right) and the polarity (+ and -).

• Do not let the bare speaker wires touch each other or any metal

part of this unit. This could damage this unit and/or the speakers.

• Never touch the speaker terminals while the AC input cord is

connected to the wall AC outlet. Doing so could result in electric

shocks.

Note : For safe amplifier operation, use the speakers with

impedance of over 8Ω when you use either SPEAKER A or

B terminals and use the speakers with impedance of over

16Ω when you use both SPEAKER A and B terminals.

■SWITCHED AC OUTLET

■Connecting speaker wire

1. Strip away approx. 10 mm (3/8 inch) of

wire insulation, then twist the wire ends

tight.

2. Loosen by turning the speaker

terminal counter-clockwise.

3. Insert the bare part of the wire.

4. Tighten by turning it clockwise.

AX5505(G-Eng)100204_AX5505(Eng).qxp 2010-02-23 오후 2:04 페이지 5

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Sherwood AX-5505 Instructions d'exploitation Page 5